A semi-gantry crane is a special type of crane that combines the design of an overhead crane and a motorized gantry crane. One side of the semi-gantry bridge is supported by an overhead runway.
Generally speaking, the lifting capacity of the semi-gantry crane determines the type of crane beam: single girder, double girder and box girder. Single-girder semi-gantry cranes are designed to handle loads of about 20 tons, and double-girder semi-gantry cranes can be used to handle materials over 20 tons.
Choosing the right material handling solution is critical. Hence, customization or customization overhead is created. But how do you find the best type of semi gantry crane for your application? If the building is already built, the most suitable overhead crane should be selected according to the specific application conditions and the size of your building. The following tips are for your reference to find the best crane for you.
| Name | |
| Customer Company | |
| Phone | |
| Address |
| Lifting material | ||
| Temperature | Highest temperature | _______℃ |
| Lowest temperature | _______℃ | |
 | |
| A - Span(m) | |
| B - Main hook lifting height(m) | |
| C - Auxilliary hook lifting height(m) | |
| D - Rail top to lowest point of workshop(m) | |
| E - Floor to rail top(m) | |
| F - Railway length(m) | |
| SPECIFICATION | Option | |
| Beam Configuration | A. Single Beam B. Double Beam | |
| Capacity(ton) | Main hook | |
| Auxiliary hook | ||
| Speed(m/min) | Main hook | A. Single ____ B. Double ____ /____ C. Inverter Control ____--____ |
| Auxiliary hook | A. Single ____ B. Double ____ /____ C. Inverter Control____--____ | |
| Cross travel | A. Single ____ B. Inverter Control ____--____ | |
| Long travel | A. Single ____ B. Inverter Control ____--____ | |
| Working Class | Main hook | A. M3 B. M4 C. M5 D. M6 E. M7 F. M8 |
| Auxiliary hook | A. M3 B. M4 C. M5 D. M6 E. M7 F. M8 | |
| Cross travel | A. M3 B. M4 C. M5 D. M6 E. M7 F. M8 | |
| Long travel | A. M3 B. M4 C. M5 D. M6 E. M7 F. M8 | |
| Industrial Voltage | ____V ___Hz 3phases | |
| Control Mode | A. Remote Control B. Pendent Line Button Control C. Cabin Control | |
| Hook Attached Accessary | A. C-hook B. Grab Bucket C. Magnet D. Magnet spreader E. Ladle D. Other____ | |
