Your are here:  Home > Products > Steel&Rolling Mill Overhead Crane > Metallurgy Ladle Overhead Crane > QDY Steel Making Industry High Temperature Double Girder Ladle Hook Overhead Crane


QDY Steel Making Industry High Temperature Double Girder Ladle Hook Overhead Crane

QDY Steel Making Industry High Temperature Double Girder Ladle Hook Overhead Crane

QDY Steel Making Industry High Temperature Double Girder Ladle Hook Overhead Crane is mainly used at the place where the molten metal is lifted. The working class of the complete machine is FEM 4M, and the thermal-protective coating is added at the bottom of the main girder. The assembling and test of the crane conform to the document No. ZJBT[2007]375 WHICH WAS ISSUED BY General Administration of Quality Supervision, Inspection and Quarantine of China. The place where molten nonmetal material and red-hot solid metal is lifted also can refer to this document. 

Overview:

QDY Steel Making Industry High Temperature Double Girder Ladle Hook Overhead Crane is mainly used at the place where the molten metal is lifted. The working class of the complete machine is FEM 4M, and the thermal-protective coating is added at the bottom of the main girder. The assembling and test of the crane conform to the document No. ZJBT[2007]375 WHICH WAS ISSUED BY General Administration of Quality Supervision, Inspection and Quarantine of China. The place where molten nonmetal material and red-hot solid metal is lifted also can refer to this document.
 
Main features
 
Mainly consists of bridge, trolley, hook beam, crane travelling and electric part, etc.;
Adopt double-girder structure below 125t and four-girder structure above 125t;
The main grabbing device of main hook is fixed-spacing hook girder used to lift foundry ladle
;
Auxiliary hook is used to work with main hook to dump the molten iron and do other subsidiary lifting operation;
Main hoisting and transportation equipment in steel mill and smelter workshop;
Used for transshipment and pouring of liquid metal during melting, etc;
Add thermal-protective coating under the main girder;
Ambient temperature: below +60°C, moisture: less than 50%;
Crane assembly and test accord with No. 375, 2007 document issued by AQSIQ. 
HTB1OrQNHpXXXXcrXXXXq6xXFXXXF.jpg
Main beam
  HTB183QJHpXXXXXLXVXXq6xXFXXXY.jpg
Trolley
HTB19grzHpXXXXbNXFXXq6xXFXXXP.jpg 2. span length.(rail center to rail center)
3. lifting height.(hook center to ground)
4. Have you installed the rails? Do you need us supply the rails? How long is it?
5. Power supply: Voltage.Hz.Phase.
6. Working condition: which material to lift? temprature?
7. Would be better if you have drawings of your plant.

Features

 

Specification

 

 

SUBMIT

Henan Sinoko Cranes Co,.Ltd.  All Rights Reserved.        Sitemap   Sitemap   ror
page contents