10 ton Electric Hoist European Overhead Crane

Electric hoist overhead crane could be made from 5 ton,10 ton,15 ton to 20 ton with smooth inverter traveling.

Contact Now

Overview:

Electric hoist overhead crane is equipped with wire rope electric hoist.
Our European model single girder bridge crane could be made from 5 ton,10 ton,15 ton to 20 ton with smooth inverter traveling, with advanced technology from our partner KONECRANE.

Features

1. High reliability, safety, free maintenance rate;
2. Compact design, small size, low dead weight, low headroom, low noise;
3. Power-saved. The total motor power is much lower than normal design;
4. Main girder uses bias-rail box type structure, with optimized design and light dead weight.

Specification

1. Hoist motor: Crane uses sturdy cylindrical/ conical rotor pole-changing motors with elegant continuous cast aluminum sections, integrated safety brakes insulation class F, IP54 protection;

2. Limit Switches : To prevent over hoisting & over lowering of hook;

3. Soft Starts : Electric / Electronic soft start modules electrically coupled to the long travel drives to achieve jerk free, cushioned & smooth starts;

4. Maintenance Platform With Hand Railing : Easy, simple and safe maintenance of the crane extended partially or totally along the girder;

5. Painting: Every component & part is thoroughly scrubbed & painted with two coats of primer before assembly & two coats of synthetic enamel after testing.